Wire Colour Convention for Control Circuits
Wire colour is a convention, and a convention only works if it is the same in every panel the plant receives. Mixing IEC colours with a customer standard inside one cabinet is the fastest way to make a panel unmaintainable.
The IEC convention
Black or brown for line, blue for neutral, green-yellow for protective earth, and any colour except green-yellow for control. In practice most panels use red for 24 V DC positive, black or blue for 0 V, and a distinct colour for the safety circuit. That is a convention, not a standard, and it must be written down.
Marking rather than colour
Wire numbers printed on ferrules or sleeves are more reliable than colour, because a colour-blind electrician, a poor light and a cheap camera all defeat colour coding. Number every core to the drawing and the cabinet becomes readable regardless of colour.
Customer standards
Where a customer supplies a standard, follow it throughout and note it on the drawing. Where two standards conflict — the customer uses blue for 24 V and the plant's existing panels use red — raise it before wiring, not after. The label note covers the marking, and the custom control panel is wired to a colour scheme agreed at order stage.
