News
N

News

News

Labels That Survive the Plant Environment

Column: Technical Notes    Time: 2025-03-27

label printed on office paper and taped to a wire lasts about a year in a plant, and by then it has faded to illegibility. Labels are the difference between a panel that can be maintained and one that has to be traced by hand.

Material

Polyester or vinyl with a permanent acrylic adhesive for indoor panels. For outdoor or washdown, polyester with a laminate over the print. Paper labels are acceptable only inside a sealed enclosure with no oil mist, which rules out most industrial installations.

Printing

Thermal transfer with a resin ribbon resists ultraviolet and chemicals; direct thermal printing fades in months. Laser-printed sheets on polyester are a reasonable compromise for small volumes and hold up well indoors. Handwriting with a permanent marker is the last resort and should be flagged in the inspection report.

Placement

Label the wire near the terminal, not at the middle where it can be confused with a neighbouring core. Label the terminal block on the rail, and label the device on the mounting plate at the top-left corner where it is readable with the door open. The wire colour note covers the scheme, and the custom control panel uses printed polyester labels on every core and device.

More News