
Vacuum Pump Control Cabinet
Vacuum systems run unattended, so the cabinet has to decide which pump starts, which one rests, and what happens when the gauge does not reach set point. We build that logic into the panel, with the alarm and trip history readable on the door.
- Pump capacity
- 1 – 8 pumps per cabinet, 0.75 – 75 kW each
- Starting
- DOL, star-delta, soft starter or VFD
- Feedback
- Vacuum gauge or pressure transmitter, 4–20 mA / 0–10 V
Overview
Pumps can be started direct-on-line, star-delta, by soft starter or by drive, depending on the motor size and the supply capacity. The vacuum transmitter or gauge switch feeds the controller, and lead-lag rotation equalises run hours across the set.
Every panel is function-tested against a simulated gauge signal before dispatch, so the sequence is proven before the pumps are connected. The printed sequence description goes in the document pocket.
Build details
- Pump rotation equalised by run-hour count
- Interlock prevents two pumps starting against a closed valve
- Alarm and trip history readable on the HMI
- Base plate and cable tray can be supplied with the cabinet
- Dry contacts for BMS or plant SCADA
Specifications
| Pump capacity | 1 – 8 pumps per cabinet, 0.75 – 75 kW each |
|---|---|
| Starting | DOL, star-delta, soft starter or VFD |
| Feedback | Vacuum gauge or pressure transmitter, 4–20 mA / 0–10 V |
| Control | Automatic staging, lead-lag rotation, duty / standby |
| Interface | HMI panel, remote start-stop, dry contacts for BMS |
| Protection | Phase failure, over / under voltage, overload, over-temperature |
| Enclosure | Floor-standing steel or stainless steel, IP54 |
| Options | Anti-condensation heater, hour meters, event log |
Specifications vary with the motor list and the site supply. Tell us the load and the environment and we will confirm the build.
Typical applications
- Packaging machines
- Vacuum coating
- Woodworking
- Central vacuum systems
- Chemical processing
- Holding tables
