News
N

News

News

Ferrules, Conductor Ends and Pull-Off Force

Column: Technical Notes    Time: 2025-04-10

crimp that pulls off at 30 N looks fine and fails in a panel that vibrates. Ferrules are the cheapest component in the cabinet and the one that decides whether the wiring survives ten years of a compressor starting next to it.

Standard and size

DIN 46228 defines the ferrule: colour-coded by conductor size, with or without a plastic collar. Twin ferrules for two conductors in one terminal, which is common on control circuits. Size to the conductor, not to the terminal: a 1.5 mm² cable in a 2.5 mm² ferrule leaves strands outside the crimp.

The crimp itself

Use a ratchet crimp tool with the correct die, and check the pull-off force on a sample from each reel. four-indent crimp is standard for control wiring; a hexagonal crimp is used for larger power conductors. plier or a hammer crimp is not a crimp.

Inspection

Look for strands outside the barrel, a collar that has been cut by the die, and a barrel that is shorter than the insertion depth. Any of the three is a reject. The crimp tool note covers calibration, and the custom control panel is wired with ferrules to DIN 46228 and inspected at 100 % on control circuits.

More News