Marking Forklift and Sling Points
Panel lifted from the wrong side bends a door frame, and a bent frame means a gasket that no longer seals. Marking the lift points on the case and on the panel costs a stencil and prevents the most common transport damage.
On the case
Forklift pockets marked on both long sides with an arrow and the words "fork here". Where the case is too wide for a standard fork, mark the sling points instead, with the sling angle. Weight stencilled on two faces at eye height.
On the panel
Lifting eyes or slots on the top of floor-standing enclosures, rated for the panel weight including the busbar. Where there are none, the panel is lifted by the plinth only, and that instruction must be printed on the case — a panel lifted by its top edge with a sling will deform the roof and break the paint.
Container loading
Mark which side faces the door so the panel can be removed without dragging it across other cargo. Where the case is stacked, mark the maximum stack height. The container loading note covers the rest, and the custom control panel export cases carry lift and weight markings on two faces.
