Plinth Height, Cable Access and Cleaning
Floor-standing enclosures sit on a plinth for three reasons: cable access from below, protection from washdown water on the floor, and a height that puts controls at a usable level. The height chosen affects all three.
The usual heights
100 mm for a clean indoor installation, 200 mm where cables enter from a floor trench, and 300 mm in food plants or washdown areas where the floor is hosed. Below 100 mm there is no room to bend a 25 mm cable, and above 300 mm the top of a 2000 mm enclosure becomes hard to reach for maintenance.
Material and sealing
Painted steel is normal indoors; stainless or galvanised in wet areas. The plinth must be sealed to the enclosure with a gasket, and open at the front with a removable panel for cable access. plinth welded to the enclosure cannot be removed, which is fine until the panel has to be moved through a 900 mm doorway.
Fixing to the floor
Four anchor points minimum, accessible with the panel in place. On a raised floor or a mezzanine, the plinth carries the weight and must be designed for it — a 2000 mm panel with a copper busbar can weigh 400 kg. The thermal note covers the ventilation that is often routed through the plinth, and the custom control panel is quoted with the plinth height confirmed against the site floor plan.
