News
N

News

News

Powder Coat Thickness and Corrosion Life

Column: Technical Notes    Time: 2025-04-25

Powder coat is sold by colour and specified by thickness. Two panels that look identical on delivery can differ by a factor of two in coating thickness, and that difference is the difference between five years and fifteen outdoors.

The numbers

Indoor panels: 60 to 80 µm. Outdoor or industrial: 100 to 120 µm. Coastal or chemical: a zinc-rich primer under 120 µm of powder, or a duplex system. Below 60 µm, coverage over sharp edges is incomplete and rust starts at the edges and the cut-outs, which is where it is least visible until it is structural.

Pre-treatment

The coating is only as good as what is under it. Degrease, phosphate and rinse — skipping the phosphate stage is a common shortcut that halves the corrosion life. For galvanised sheet, a chromate conversion coating is needed or the powder will not adhere at the zinc surface.

Checking it

electronic coating thickness gauge on five points per panel face costs a minute and gives a number you can put on the inspection report. The stainless note covers the alternative, and the custom control panel is built with the coating system stated on the drawing and measured before dispatch.

More News

WhatsApp +852 6174 0278WhatsApp +852 6177 3422